If you are like many people, you have a SimpliSafe keychain. This small device stores a single CR2032 or CR1632 rechargeable battery inside. You can either use the rechargeable battery to power the system for as long as 24 hours, or you can connect the base station to a power outlet and use the rechargeable battery for a longer duration. You can expect the rechargeable battery to last for many years.
CR1632
To change the battery in your SimpliSafe Keychain Remote, you will need to remove the battery cover and then push the rear of the remote towards the USB port. The battery is made of CR1632 lithium ion battery, which is rechargeable. The same battery is used in SimpliSafe wireless sensors and cameras. Using a lithium battery means they can work even in an electrical grid outage. Additionally, if you replace your battery, it will last for up to 5 years.
A new CR1632 3V battery can be used in the Keyring Remote, but you should remember to put the negative side of the battery on the positive side. If you want to change the battery, you can also change the name on the Key Fob. You can replace the battery using the instructions provided with the Keyring Remote. The key fob’s red panic button is easy to press; all you have to do is hold it for a few seconds.
CR2032
A CR2032 SimpliSafe keychain battery is necessary for your SimpliSafe alarm system. These keychains are easily accessible and feature a panic button for emergencies. You can even use more than one SimpliSafe alarm system at one time. This type of battery can last up to 10 years, depending on usage and location. The back panel should also be replaced if the battery is running low. To keep the alarm working for a long time, you should replace your battery every two or three years.
The base station uses a rechargeable battery to operate, and the entry sensor uses a CR 2032 lithium-ion battery. You can easily replace the battery by sliding up the entry sensor. The battery is made of lithium and is a CR2032 type. It’s also recommended to keep spares of this battery with your Simplisafe keychain. You can buy this type of battery at any electronics store or online.
When replacing the CR2032 Simplisafe keychain battery, it’s important to remember that your keypad requires a CR2032 lithium 3V battery. It works with the Simplisafe device’s panic button as well. To replace the keypad battery, you must unscrew four screws and slide up the Siren. To replace the alarm sensor battery, slide up the temperature/freeze sensor and replace it with a CR2032 lithium 3V battery.
The SimpliSafe base station also uses rechargeable batteries to run the device. In case of a power outage, the system will switch over to the rechargeable battery. The battery will power the system for up to 24 hours, depending on usage and location. If you use your Simplisafe device for less than 24 hours, it may be necessary to replace it more often. This rechargeable battery will also last longer if you keep it active.
